13
■
To start COMFORT AIRFLOW operation
3. Press “COMFORT AIRFLOW button”.
• The flap position will change, preventing air from blowing directly on the occupants of the room.
• “
” is displayed on the LCD.
• Airflow rate is set to “AUTO”.
〈
COOL/DRY
〉
The flap will go up.
〈
HEAT
〉
The flap will go down.
■
To cancel COMFORT AIRFLOW operation
4. Press “COMFORT AIRFLOW button” again.
• The flaps will return to the memory position from before COMFORT AIRFLOW mode.
• “
” disappears from the LCD.
Notes on COMFORT AIRFLOW operation
Notes on flaps and louvers angles
• POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the same time.
Priority is given to POWERFUL operation.
• When “
SWING button
” is selected, the flaps
swinging range depends on the operation mode.
(See the figure.)
■
ATTENTION
• Always use a remote controller to adjust the flaps
angle. If you attempt to move it forcibly with hand
when it is swinging, the mechanism may be broken.
• Be careful when adjusting the louvers. Inside the
air outlet, a fan is rotating at a high speed.
• If the air conditioner is operated in cooling or
dry mode with the flap kept stopped in the
downward direction, the flap will
automatically start operating in
approximately an hour in order to prevent
dew condensation.
45˚
5˚
45˚
5˚
15˚
45˚
50˚
0˚
0˚
0˚
In DRY mode or COOL mode
Upper limit (SWING)
Lower limit (SWING)
Upper limit (SWING)
Lower limit (SWING)
Upper limit (SWING)
Lower limit (SWING)
Stop operation
Stop operation
Stop operation
In HEAT mode
In FAN mode
COMFORT AIRFLOW
COMFORT AIRFLOW
01_EN_3P208145-1E.fm Page 13 Tuesday, April 22, 2008 1:55 PM
