![background image](http://html.mh-extra.com/html/daikin/arx20k2v1b/arx20k2v1b_service-manual_501305104.webp)
Field Settings
SiBE041525F
93
Trial Operation and Field Settings
3. Field Settings
3.1
Temperature Display Switch
ARC466A6
You can select Celsius or Fahrenheit for temperature display.
Press the
TEMP
and
ON TIMER
buttons at the same time for 5 seconds to change the unit
of temperature display.
You can also change the unit of temperature display by pressing the
TEMP
and
buttons
at the same time for 5 seconds.
3.2
When 2 Units are installed in 1 Room
Outline
When 2 indoor units are installed in 1 room, 1 of the 2 indoor units and the corresponding
wireless remote controller can be set for different addresses.
Procedure
(1) Remove the battery cover of the remote controller and cut the address jumper.
(2) Press the center of the
TEMP
button and the
OFF
button on the remote controller at the
same time.
(3) Select
A
(address setting) with the
TEMP
or
TEMP
button.
(4) Press the
FAN
button to enter the address setting mode.
→
The indoor unit operation lamp blinks for 1 minute.
(5) Press the indoor unit
ON/OFF
button while the operation lamp is blinking.
(6) Press the
FAN
button on the remote controller for 5 seconds to return to the normal mode.
(R14477)
Address
EXIST
Jumper
CUT
1
2
(R21071)
(1)
Jumper
(R21822)
(2)
(4) (6)
(2) (3)
(3)
(R22992)
ON/OFF
(4)
Operation lamp
(5)
Indoor unit ON/OFF
button
Summary of Contents for ARX20K2V1B
Page 12: ...SiBE041525F 1 List of Functions Part 1 List of Functions 1 Functions 2 ...
Page 15: ...SiBE041525F Specifications 4 Part 2 Specifications 1 Specifications 5 ...
Page 16: ...Specifications SiBE041525F 5 Specifications 1 Specifications See corresponding databook ...
Page 51: ...SiBE041525F Remote Controller 40 Part 5 Remote Controller 1 Remote Controller 41 ...