![background image](http://html1.mh-extra.com/html/daikin/altherma/altherma_quick-manual_3229530004.webp)
UK 04.08.
Copyright © Daikin
Printed in the UK on paper that is 50% recycled and 50% from sustainable sources
.
www.altherma.co.uk
For full user instructions, please refer to the Altherma operation manual.
Activating timer function
To activate the schedule time press and will appear on the display.
To deactivate the schedule timer press and will disappear.
Useful information
If there no external thermostat connected the controller works on a last command
basis i.e. if you change the water temperature for the space heating or turn the
system on then this will stay the same unless there is a action programmed in the
schedule timer such as a water temperature change or off function.
Hot water boost
A hot water boost mode is available for rapid water heating.
If activated this will override any settings and switch the heat pump to hot water
heating & also switch the booster heater on.
To activate press & hold until you see & symbols appear.
The boost function will then run until either deactivated, by pressing or until
the set water storage temperature has been achieved.
Note:
Increased use of the Boost function will effect the overall efficiency of
the system.
1777Altherma_artwork.indd 4
23/4/08 12:14:52