Daikin Altherma EKRTCTRL1 User Manual Download Page 5

5

S

I

U

1.1 

1.2 

General waenings

Fundamental safety rules

  This instruction is an integral part of the booklet of the 

appliance on which the kit is installed. Please consult 
this booklet for general warnings and fundamental safety 
rules.

 This manual is designed only for the qualified and 

authorised installation technician, who must be 
sufficiently trained and in possession of all psycho-
physical requirements as per the law. 

 

All operations must be carried out with care and 
according to best practices, and in compliance with 
workplace safety regulations.

  After unpacking, check that the contents are intact and 

that all parts are included. If not, contact the agent who 
sold the appliance to you.

 It is forbidden to modify the safety or adjustment 

devices without authorisation from and indications of the 
manufacturer.

  It is forbidden to dispose of, or leave in the reach of 

children, the packaging materials which could become 
a source of danger.

 Repairs or maintenance must be performed by the 

Technical Assistance Service or by qualified personnel 
in accordance with this manual. Do not modify or tamper 
with the appliance as this could create dangerous 
situations and the manufacturer will not be liable for any 
damage caused.

GENERAL

  Remember that some fundamental safety rules should 

be followed when using a product that uses electricity 
and water, such as:

 The unit can be used by children over the age of 

8, and by people with reduced physical, sensory or 
mental capabilities, or with no experience or necessary 
knowledge, as long as they are monitored or after they 
have received instructions on the safe use of the unit 
and have understood the dangers involved.

 

Children must not play with the appliance.

  The cleaning and maintenance that must be 

performed by the user should not be carried out by 
children without supervision.

  It is forbidden to touch the appliance with wet hands 

or body when barefoot.

  It is forbidden to carry out any cleaning before having 

disconnected the appliance from the electricity mains 
supply by turning the system master switch to "OFF".

 It is forbidden to modify the safety or adjustment 

devices or adjust without authorisation and indications 
of the manufacturer.

  It is forbidden to pull, cut or knot the electrical cables 

coming out of the appliance, even if it is disconnected 
from the mains supply.

  It is forbidden to poke objects or anything else through 

the inlet or outlet grills.

  It is forbidden to open the doors which access the 

internal parts of the appliance without first turning the 
system master switch to "OFF". 

  It is forbidden to dispose of or leave in the reach of 

children the packaging materials which could become 
a source of danger.

  It is forbidden to climb onto the appliance or rest any 

object on it.  

 The external parts of the appliance can reach 

temperatures of more than 70°C.

Summary of Contents for Altherma EKRTCTRL1

























Reviews: