5
|
Operation
User reference guide
29
EL23E
Daikin Altherma 3 R MT F
4P708480-1 – 2023.05
2
Adjust the desired room temperature.
+
–
21
°C
1
a
b
Room
a
Actual room temperature
b
Desired room temperature
If scheduling is on after changing the desired room temperature
▪
The temperature will stay the same as long as there is no scheduled action.
▪
The desired room temperature will return to its scheduled value whenever a
scheduled action occurs.
You can avoid scheduled behaviour by (temporarily) turning off scheduling.
To turn off room temperature scheduling
1
Go to [1.1]:
Room
>
Schedule
.
2
Select
No
.
5.6.5 To change the desired leaving water temperature
INFORMATION
The leaving water is the water that is sent to the heat emitters. The desired leaving
water temperature is set by your installer in accordance with the heat emitter type.
Only adjust the leaving water temperature settings in case of problems.
You can use the leaving water temperature setpoint screen to read out and adjust
the desired leaving water temperature.
1
Go to [2]:
Main zone
or [3]:
Additional zone
.
Main zone
2
Additional zone
3
Summary of Contents for Altherma 3 R MT F
Page 65: ......
Page 66: ......
Page 67: ......
Page 68: ...4P708480 1 2023 05 Copyright 2023 Daikin Verantwortung f r Energie und Umwelt...
