4
|
Operation
User reference guide
33
ET9W
Daikin Altherma 3 H HT F
4P586461-1 – 2019.07
Example: Changeover restrictions
When
Restriction
During cold season.
Example:
October, November, December, January,
February and March.
Heating only
During warm season.
Example:
June, July and August.
Cooling only
In-between.
Example:
April, May and September.
Heating/Cooling
If both the
Operation mode
and the
Operation mode schedule
are set to
Automatic
, the operation mode will be determined by the outdoor temperature.
4.6.3 Determining which temperature control you are using
To determine which temperature control you are using (method 1)
Check the installer settings table filled in by the installer.
To determine which temperature control you are using (method 2)
You can see on the home screen which temperature control you are using.
6
1.6
bar
18 Feb 2018
22:19
55
18
21
45
a2
a1
b
a1
Heat emitter of the main zone (in this example
Underfloor heating
)
a2
Heat emitter of the additional zone (in this example
Radiator
). If no icon is
displayed, there is no additional zone.
b
Room thermostat type of the main zone:
If b=…
Then the temperature control is…
Main zone
Additional zone (if any)
Room thermostat control External room thermostat
control
External room thermostat
control
No icon
Leaving water
temperature control
Leaving water
temperature control
4.6.4 To change the desired room temperature
During room temperature control, you can use the room temperature setpoint
screen to read out and adjust the desired room temperature.
1
Go to [1]:
Room
.
Room
1
Summary of Contents for Altherma 3 H HT F
Page 65: ......
Page 66: ......
Page 67: ......
Page 68: ...4P586461 1 2019 07 Copyright 2019 Daikin Verantwortung f r Energie und Umwelt...