2
|
Quick actions
User reference guide
8
ETVH/9W(G) + ETBH/9W
Daikin Altherma 3 H HT F+W
4P586456-1 – 2019.07
To change the desired leaving water temperature
You can use the leaving water temperature setpoint screen to read out and adjust
the desired leaving water temperature.
1
Go to [2]:
Main zone
or [3]:
Additional zone
.
Main zone
2
Additional zone
3
2
Adjust the desired leaving water temperature.
+
–
35
°C
2
a
b
Main zone
+
–
45
°C
3
a
b
Additional zone
a
Actual leaving water temperature
b
Desired leaving water temperature
To change the weather-dependent curve for the space heating/cooling zones
1
Go to the applicable zone:
Zone
Go to …
Main zone – Heating
[2.5]
Main zone
>
Heating WD
curve
Main zone – Cooling
[2.6]
Main zone
>
Cooling WD
curve
Additional zone – Heating
[3.5]
Additional zone
>
Heating
WD curve
Additional zone – Cooling
[3.6]
Additional zone
>
Cooling
WD curve
2
Change the weather-dependent curve.
There are 2 types of WD curves:
slope-offset curve
(default), and
2-points
curve
. If needed, you can change the type in [2.E]
Main zone
>
WD curve
type
. The way to adjust the curve depends on the type.
