PRODUCT DESIGN
4
AE room air conditioners and AH heat pump units are de-
signed for window installations in residential applications and
are available in 9,000, 12,000 and 18,000 BTUH sizes. They
are designed for 208/230 volt single phase applications.
The provided filter must be installed and under no circum-
stances should the unit be operated without the filter in place.
Location and Clearances
Be sure electrical service is adequate for chosen model of
air conditioner or heat pump. Complete electrical rating for
unit is found on serial plate located behind front grille. Elec-
trical outlet must be close enough to unit for power cord to
reach without strain.
Air conditioner should be the only appliance on individual
circuit.
For personal safety and to avoid possible damage to appli-
ance or home, observe all safety instructions.
•
Unit with an optional window mounting kit
These models are designed for mounting though an
opening in a wall. These units can be adapted to window
installation by using the optional window mounting kit
supplied with your unit.
•
Unit without a window mounting kit
No window mounting kit is supplied with the unit. These
models are designed for mounting through an opening in
a wall. These units can be adapted to window installation
by purchasing an optional window mounting kit. Consult
your dealer to choose the kit that is appropriate for your
model and installation.
NOTES:
1. Mechanical experience is required to install the air
conditioner or heat pump.
2. Installation can take from 1 to 3 hours, depending on
installer’s knowledge and skill.
3. If you encounter problems during installation, call our
consumer information line toll-free at 1-877-376-0214 (U.S.
and Canada only). If your problem cannot be resolved by
phone, contact an authorized Amana
®
brand servicer.
Contact and service will be at your expense.
