Si12-995
Removal of Coils / Thermistors
Removal Procedure
27
5. Removal of Coils / Thermistors
Procedure
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
1. Remove the electronic
expansion valve coils.
1
Pull out the electronic
expansion valve coils.
2. Remove the thermistors.
Place the thermistor so that
its edge comes up to the
edge of the fixture.
Be careful not to lose the
clips for the thermistors.
1
Pull out the gas pipe
thermistors.
Electronic
expansion
valve coil
(R10415)
(R6446)
Gas pipe
thermistor
(R17412)
(R6448)
Gas pipe thermistor
Clip
