background image

Q-222-034 

 

 
 

 

Countermeasures against troubles 

If trouble occurs within the warranty period, DAIICHI ELECTRONICS will repairs this product. 

 

 

Disposal 

Please dispose this product as industrial waste (non-combustible). 
Mercury parts and a nickel-cadmium battery are not used for this product. 

 

 

Warranty period 

The warranty period of the product is one year after the date of delivery. 

 

 

Warranty scope 

In the case that a defect is found in our product during the warranty period due to our responsibility, 
we will replace the defective part and repair. 
However, we will not be liable if the faults or defects are under any of the following items. 

 When the faults or defects are resulted from the modification or repair carried out by any other entity 

than our company. 

 Failure caused by violating various conditions regarding use, storage, etc. specified by the supplier. 

 When the faults or defects are caused by a reason not belongs to purchased or delivered products. 

 Damage or malfunction due to relocation or other transportation, movement or dropping. 

 In case that the faults or defects are resulted from force majeure such as fire or abnormal voltage  

and natural calamity or disaster. 

Our company shall not be liable for compensation of damages caused by any reason which is not our 
responsibility, loss opportunity, loss profits incurred to the user, special damages and consequential 
damages whether foreseeable or not, or damages not relating to our products. 

 

 

Replacement cycle of the product  

We recommend updating the product for 10 years as a rough standard. 

 

 

Change of instruction manual written contents 

This instruction manual changes written contents without a notice by product improvement etc. 

 

Summary of Contents for VETT2-91A













Reviews: