FSDLC-220-047
3
1. Outline on the product
This product is a small plug-in structure alarm setter.
This product takes a DC voltage or DC current signal as input, compares it with the preset operating point,
and outputs the excess or deficiency as a contact signal.
The full scale of the input can be arbitrarily set on the actual scale according to the process amount, and
each set value (operating value, contact delay, etc.) can also be set freely.
This product is used in combination with a mounting base (FWBA-□, hardware model B).
1.1 Features of product
The setting accuracy is ±0.1％ (％ of input span).
The display accuracy is ±0.1％ ±1 digit (％ of input span).
(±0.2％ for voltage input less than 1V)
Various settings can be changed with the front switch.
The measured value (real scale) and various set values can be confirmed on the LCD.
The backlight lights when a key is pressed.
The backlight lights off 30 seconds after the key operation is completed.
The set value is guaranteed by the non-volatile memory E
2
PROM even during a power failure.
The pre-alarm function displays the progress of the contact delay time by blinking the monitor lamp.
(Pre-alarm ON/OFF can be selected by setting)
2. Installation
2.1 Outline dimensions (Unit mm)
(1) FSDLC
72
For 2 contacts
For 3 contacts
For 4 contacts
48
Fixing screw
11
Name plate
85
