－
13
－
(3) If the tip gauge point is out of alignment in the horizontal direction to the reference point of the touch
gauge, make alignment adjustment following the procedure shown below.
1. Dismount the hood (L10602B02).
2. Disconnect the power cable (L10601D) from the nozzle holder assembly (L10602C),
unfasten the hexagon socket head cap screws (M5
×
20) that fix the nozzle holder to rotate it
to the direction of misalignment (or to the left or right), and then make adjustment.
3. Securely fix the nozzle holder and power supply cable, and then mount the hood.
Fig. 3.7 Right and left direction adjusting procedure of the torch
(4) In case that the torch tip is not correctly positioned even after making adjustments as shown in (1) - (3),
it is possible that there is a distortion in the L-bracket or the nozzle assembly. Follow the procedures
(1) - (3) once again, and if it remains uncorrected, please contact to your nearest sales distributor of
our company.
(5) Dismount the torch gauge when the adjusting procedure of torch is finished. Note that you need to
create the origin position checking program before removing the tip gauge and mounting the nozzle
and the contact tip onto the torch.
Dismount the hood (L10602B02)
Dismount the bolt to fix feeding cable
The bolt to fix nozzle holder
comes out.
Hood
Nozzle holder ASSY
Summary of Contents for OTC RT3500S
Page 2: ......
