－
2
－
1. SAFETY INFORMATION
The following safety alert symbols and signal words are used throughout this manual to
identify various hazards and special instructions.
WARNING
WARNING gives information regarding possible personal injury or loss
of life.
CAUTION
CAUTION refers to minor personal injury or possible equipment
damage.
Indicates "
MANDATORY
" matters.
Indicates "
PROHIBITED
" matters.
2. ARC WELDING SAFETY PRECAUTIONS
WARNING
ARC WELDING can be hazardous.
1.
PROTECT YOURSELF AND OTHERS FROM POSSIBLE SERIOUS INJURY OR DEATH.
Be sure to:
・
Keep children away.
・
Keep pacemaker wearers away until consulting a doctor.
2.
Read and understand the summarized safety information given below and the original
principal information that will be found in the PRINCIPAL SAFETY STANDARDS.
3.
Have only trained and experienced persons perform installation, operation, and
maintenance of this equipment.
4.
Use only well-maintained equipment. Repair or replace damaged parts at once.
ARC WELDING is safe when precautions are taken.
CAUTION
Be sure to observe the followings for preventing physical injuries, a fire and electric shock.
●
Use this welding power source in the rain can cause to failure.
This welding power source is designed for IP23S of degree of protection, which is
intended indoor use.
●
Use this welding power source for the propose other than the welding can cause
serious physical injuries.
Do not use a welding power source for such as pipe thawing.
●
Placed on the inclined plane, the Angle should be less than 10 °, and fixed wheel in
order to prevent the power supply has fallen, sliding.
MANDATORY
PROHIBITED
