－
3
－
1. SAFETY INFORMATION
This section explains the safety precautions regarding operation of the Cooling unit 6H/IF.
The following safety alert symbols and signal words are used throughout the manual to ensure proper
operation of the equipment and to prevent from various hazards that cause serious injury and damages.
Indication and explanation for the symbols are as follows:
Symbols
Explanation
WARNING
WARNING gives information regarding possible personal injury or loss of
life.
CAUTION
CAUTION refers to minor personal injury or possible equipment damage.
1.1 OPERATING PRECAUTIONS
To prevent serious injury or accidents, ensure to follow the instructions below:
WARNING
•
Be sure to read and understand the information in the manual before operating the
equipment.
•
Safety and warning labels on the equipment indicate any possible risks. Keep these
labels clean and legible at all times.
•
Observe the accident prevention regulations and any regional regulations.
•
Only authorized personnel or person with full understanding and experience of the
equipment must perform installation, maintenance and repair of the equipment.
•
Use only well-maintained equipment. Repair or replace damaged parts at once.
•
Original spare parts have been specially designed for our equipment. The use of non-
original spare parts may cause variations in performance or reduce the foreseen level of
safety. We decline all responsibility for the use of non-original spare parts.
CAUTION
•
The owner’s manual must be kept at the location where the equipment is operated.
•
The equipment is designed for IP 23S degree of protection, which is intended indoor use.
•
If air-cooled welding torches are used, the cooling units needs to be turned off.
•
Do not use the cooling unit for purpose other than cooling welding torches.
•
This system is cooled by means of the forced circulation of air, and must therefore be
placed in such a way that the air may be easily sucked in and expelled through the
apertures made in the frame.
•
Do not use the cooling unit when the case and the cover are removed.
