DAIHAN-Sci.com or
ALL
for
LAB.com Shopping Mall
DAIHAN Scientific, WHM-C10D Digital Feedback Temp. Controller 8 /27
paused. And, you need to release the pause of each operation mode by pushing the jog
shuttle if you want to restart overall timer operations.
5. Locking Mode
After completion of set up the temperature and timer, you can set the Locking (Safe) Mode by
clicking the mode button. In the Locking Mode, the LCD shows the current temperature in
measuring value digit. In this mode, all inputs are disabled using the jog shuttle. If you want
to release this mode, click the mode select button.
6. Temperature Offset
Offset Function is addition or subtraction of indicated temperature. It is very convenient
function to synchronize displayed temperature of the plate and sample with the measured
value by the User.
A. Press Mode Switch and Jog Shuttle simultaneously in the Heating Mode (Mode S/W + Jog
S/W).
B. In this status, it is changed into “Offset” Mode and the user can adjust the value by
pushing the knob once, then the offset would be setup.
C. After the setup, the temperature on LCD display indicates the compensated temperature.
D. At this time, press the mode switch and jog shuttle simultaneously, then escape from
Offset Mode.
7. Storage of the set value
Digital Feedback controller have a “Memory” function to save each set value. The user can
save the set values to be used frequently and does not have to set the same value every
moment.
A. Set the value of each mode (except Locking mode) using Jog Shuttle.
Press the knob over one second, then the set value is blinking on LCD three times and it
means that the value has been saved.
8. Power off
After you complete to use the device, you must turn off the power switch for your safety (
⑧
).
