DAIHAN-Sci.com or
ALL
for
LAB.com
Shopping Mall
DAIHAN Scientific, Forced Convection type Oven
16/48
3. Product Usage
3.3 Usage Instructions
-
Before operation, Set the SAFETY knob to 30~40
°
C higher than operation temperature.
-
Connect the power cord to the proper power socket and Turn on the Main Switch.
* Operation method for Jog-Dial
-
Jog-Dial can be manipulated for the setting in each mode by Turning and Push motion.
-
If turning the Jog-Dial knob to clockwise or counter-clockwise, the setting values can be
adjusted, and if briefly pressing once the PUSH button, the Start or the Stop operation is
performed.
-
The Turning of the Jog-Dial knob does not manipulated during operating, and if resetting
the set value, it can be adjusted by the Jog-Dial knob after stopping the product by pressing
briefly once the PUSH button.
-
If pressing for 2 or 3 seconds the PUSH button, the set value is saved, and even if the
power is turned on again, that value is maintained. (If “0” value is saved, the setting value
is initialized.)
①
MAIN - Set Operation Time
-
When the power is turned ON, the initial screen is the setting mode of the Timer set mode.
-
TIMER LED is lighted during the operation of timer, and indicates that it is operating.
-
The range of setting time is from 00:00 to 99hr and 59min(it is possible to adjust at 1min.)
and 00:00 indicates continuous operation.
-
If the timer operation is completed, the alarm will sound and heating will be stopped.
-
The timer setting mode can be operated by referring to the jog-shuttle operation method.
< Fig 3.3.1. Set Operation Time Mode>
Time SV : 00:00
Time PV : 00:00
Set Time
Remain Time
Timer LED (Green)
