DAIHAN-Sci.com or
ALL
for
LAB.com
Shopping Mall
High Performance Dry Bath Heating & Cooling
6/48
Do not handle the power cord harshly. Disconnection or short may cause if you
bend or put a heavy thing on the unit.
When you take a plug out in a wall socket, turn the power off and then take the
plug out carefully.
Insert the plug securely into a wall socket.
Loose connections result in excessive heat generation to the unit and may cause
arcing to occur at the connection.
Avoid using multi-point extension power cords. It may cause excessive heat
generation and be the cause of a fire.
If you extend the power cord, use the cord to have sufficient electric capacity.
Be sure to operate the unit only with the specified power supply.
When you connect the product specified by 100V to 200V, it may be caused to
over-heat, electric shock or a short circuit to each part.
Do not connect wrong electricity since it is the cause of a fire.
Disconnect the power supply plug if the unit is not going to be used for an
extended period of time.
This Symbol indicates that this product is to be collected separately.
The following apply only to users in European countries:
l
This product is designated for separate collection at an appropriate collection
point. Do not dispose of as household waste.
This product is required to comply with the European Union’s Waste Electrical &
Electronic Equipment(WEEE) Directive 2002/96/EC
Installing the unit (repeated in the Section 6)
WARNING
Place the unit on a level, horizontal surface to support the capacity of the unit
without vibration. If there is vibration, install the unit on a support material with
enough space. Small place may cause the unit to drop.
Do not install at a dangerous place.
Do not operate the unit where there are flammables. It could be caused serious
accidents like explosion or fire.
