Dahua VTS, User Manual

Page: 10 / 30

6
3. Project Setup
Note:
Before operation, please make sure the device has properly wired, see Ch 2.1.
3.1. Login Interface
After device boots up, see Figure 3-1.
In login interface, enter login password, enter OK.
Note:
Default login password is 123456, and you cannot modify this password.
Figure 3-1
3.2. Device Info
Go to Config>Advance Config>Product Set Info, set no., local IP, subnet mask and etc,
see Figure 3-2.
Note:

Advance Config interface default login password is 888888, and you cannot modify
this password.

Please enter set IP address on Local IP field which must be in the same network