Configuration
18
Add single room number
Figure 5-12
2) Configure room information. See Table 5-3.
Table 5-3 Room information
Parameter
Description
First Name
Enter the information you need to differentiate each room.
Last Name
Nick Name
Room No.
The room number you planned.
If you use multiple VTH devices, the room number of the
master VTH should be "room number#0", and the room
number of the extension VTH should be "room
number#1", "room number#2", and so on.
You can have 10 extension VTH devices at most for one
master VTH.
Register Type
Select
public
, and
local
is reserved for future use.
Register Password Keep the default value.
3) Click
Save
.
The added room number is displayed. Click
to modify room information, and click
to delete a room.
Add room number in batch
1) Configure the Unit Layer Amount, Room Amount in One Layer, First Floor Number,
and Second Floor Number according to the actual condition.
2) Click
Add
at the bottom left of the interface. See Figure 5-13.
