Configuration 17
TCP/IP information
Figure 4-5
Enter the network parameters you planed, and then click
Save
.
Step 2
The VTO will restart, and you need to modify the IP address of your PC to the same
network segment as that of the VTO to log in again.
4.2.4 Selecting SIP Servers
The Session Initiation Protocol (SIP) is used for signaling and controlling multimedia
communication sessions in applications of voice and video calls. A SIP server is an application
provides information or direction to a user agent.
When this VTO or other VTOs work as SIP server, select
VTO
from the
Server Type
drop-down list. It applies to a scenario where there is only one building.
When the platform (Express/DSS) works as SIP server, select
Express/DSS
from the
Server Type
drop-down list. It applies to a scenario where there are multiple buildings or
multiple units.
If the VTO you are operating is the SIP server,
Building No.
and
Unit No.
will not be
displayed on the
Device Properties
interface in
Local Setting > Basic
.
If you selected the
Enable
checkbox of the
Alternate Server
in
Network Setting > SIP
Server
and save the setting, you need to log in the web interface again, and
Building No.
and
Unit No.
will be displayed on the
Device Properties
interface in
Local Setting >
Basic
.
Log in to the web page.
Step 3
On the homepage, select
Local Setting > Basic
.
Step 4
The
Device Properties
interface is displayed, see Figure 4-6.
