1
4 Basic Functions
4.1 Call
Under standby status (Figure 1-1, Figure 1-2), press
or
button, this VTO will call
center. The video door phone begins when the port picks up. During the whole process,
you can press the button
or
to end current talk and return to the standby
interface.
Under standby status, enter room no. or press
or
to select room no. in contacts,
and press
or
to call VTH. The video door phone begins when the VTH picks up.
During the whole process, you can press the button
or
to end current talk and
return to the standby interface.
4.2 Modify Local Config
4.2.1 Enter Project Settings Interface
In the standby status, press
or
, input password as 888888 and then press
or
to enter installation setup interface. Select up/down via button 2 and 8, press
or
to enter sub-interface.
4.2.2 Modify IP, Gateway and Subnet Mask
In project settings --- IP setup interface, select up/down/left/right via button 2,8,4,6, press
or
to enter/exit IP modification status. When you finish, press
or
to exit
modification interface.
