Interface Operation 40
Select
“Ring > VTH Ring Setup”.
Step 3
The system displays
“VTH Ring Setup” interface, as shown in Figure 6-3.
Figure 6-3
Press text box to select rings, and press
and
to set the volume.
Step 4
6.2.1.3 Alarm Ring
Set the ring when VTH gives an alarm.
Press [Setting].
Step 1
The system pops up
“Password” prompt box.
Input login password and press [OK].
Step 2
Default login password is 123456. Please refer to
“6.2.6.3 Password Setting“ for
details.
Select
“Ring > Alarm Ring Setup”.
Step 3
The system displays
“Alarm Ring Setup” interface, as shown in Figure 6-4.