Initialization 1
1
Initialization
For first time login or after the VTO being reset, you need to initialize the web interface. The
default IP address of the VTO is 192.168.1.110, and make sure the PC is in the same network
segment as the VTO.
Connect the VTO to power source, and then boot it up.
Step 1
Open the internet browser on the PC, then enter the default IP address of the VTO in
Step 2
the address bar, and then press Enter.
The
Device Init
interface is displayed. See Figure 1-1.
Device initialization
Figure 1-1
Enter and confirm the password, and then click
Next
.
Step 3
The Email setting interface is displayed.
Select the
check box, and then enter your Email address. This Email address
Step 4
can be used to reset the password, and it is recommended to finish this setting.
Click
Next
. The initialization succeeded.
Step 5
Click
OK
.
Step 6
The login interface is displayed. See Figure 1-2.
