Device Operation 7
3
Device Operation
3.1
Device Installation
This chapter explains device installation by taking NAVIGATOR X820 for example. Please refer
to actual product.
Insert data cable interface at the bottom of aircraft into the interface at the top of shock
absorber board, as shown in Figure 3-1.
Figure 3-1
Align 4 installation screws with bottom holes of the aircraft, and tighten them.
Fix PTZ camera onto the aircraft, as shown in Figure 3-2.
Figure 3-2
Turn on power supply of the aircraft, and wait for IMU (Inertial Measurement Unit)
calibration. After completing IMU calibration, the motor starts working while PTZ returns
to the center automatically.
Thus, PTZ camera has been installed completely.