Dahua SD6CE series, Installation Manual

Page: 20 / 34

12

The wall shall be thick enough to install expansion bolts.

The wall shall sustain at least 8X weight of the camera and bracket etc.
3.2.2 Installation Steps
Step 1
Take pedestal of wall-mounted bracket as template; confirm the location of threaded hole and
screw. Draw the screw location on the wall and knock the expansion bolts into the screw holes.
Step 2
Pull the speed dome cable through the main body of bracket, and hang both sides of the steel
wire rope on the fixing buckle of the speed dome and the fixing buckle under the bracket
respectively, which is shown in Figure 3-3.
Figure 3-3
Step 3
Push the speed dome upward to make the flange enter the bracket, and use hex bolt to tighten
the screws on the bracket, which is shown in Figure 3-4.