5
Figure 3-3
3.2
Installation Steps
3.2.1 Installation Environments
The ceiling mount speed dome can be installed in the hard construction ceiling in the indoor
environment. Before the installation, please make sure:
The ceiling is thick enough to install the expansion bolt.
The ceiling can at least sustain the 8x weight of the speed dome.
3.2.2 Installation Steps
3.2.2.1
WIFI Antenna Installation
Step 1
Align the thread end of WIFI antenna to the port stud on the pedestal of the speed dome, and
rotate it according to the direction shown in the Figure 3-1 until the antenna is firmly installed.
Step 2
It can adjust the direction of WIFI antenna according to requirement after the WIFI antenna is
firmly fixed on the WIFI port of the rear panel.
3.2.2.2
Speed Dome Installation
Note:
There are two cable outlet modes for ceiling mount installation.
Don
’t drill hole on the ceiling, and open wire outlet from the side of the speed dome.
Drill hole on the ceiling, and concealed wire outlet from the ceiling.
