Dahua SD10A Series, Installation Manual

Page: 11 / 29

4
2.3.1 Use Reset Button
Long press the reset button (more than 10 seconds) to reset the device.
2.3.2 Install Micro SD Card
Micro SD card is used for data storage. Micro SD card slot is located on PCB inside the dome
body; you can see it after you open the speed dome cover, which is shown in Figure 2-3. The
installation steps of Micro SD card are shown as follows.
Step 1
Hold the Micro SD card, pay attention that the golden finger of the card faces inward, which
means it faces the PCB. Otherwise it cannot be installed.
Step 2
Place the Micro SD card, press the Micro SD card slightly and it is installed in place when you
hear the “click” sound.
Note
Push the Micro SD card towards the insert direction and the card will pop out automatically.
2.4 Install Speed Dome
2.4.1 Speed Dome Cable
2.4.1.1
Cable Description
The speed dome is equipped with a multi-functional combination cable by default, which includes
power cable, video cable, RS485 control cable, alarm cable, network cable, and optical fiber
cable etc. The cable detail is shown in Figure 2-4.
Figure 2-4
Note
Different models have different cable combinations; please refer to the actual cable combination
for more details. The cable combination is the most comprehensive example shown in the figure
above.