7
Figure 2-8
2.4
Dial Switch Setup (HDCVI Intelligent Speed Dome)
Open the rear cover you can see there are two dial switches on the PTZ for you to set address,
baud rate and etc. See Figure 2-9.
Figure 2-9
Note:
HDCVI speed dome can
’t implement dial and other relevant RS485 settings if it only uses coaxial
control.
2.4.1 Initial Setup
Address: 1
Baud rate: 9600
HD/SD video format setup: HD
120
Ω
resistance: OFF
2.4.2 Dial Switch Setup for Intelligent Speed Dome
Before you control speed dome, please set the speed dome address, baud rate and HD/SD
video format. Otherwise, you cannot control the device! See Figure 2-10.
Note:
