Dahua RAD-150, User And Installation Manual

Page: 34 / 82

12
GB
4- Star-up Guide System
This chapter defines step by step how you should correctly install the analogue
repeater.
4.1- System supply
After reviewing all the points described above, the correct order to connect the power
is:
• Connect the mains power supply.
• Connect the batteries.
Once both power supplies are connected all the panel indicators should be turned off
except the green power LED.
If you notice any indication other than those described above, the origin of the problem
in the installation should be detected and the fault repaired before proceeding (see
problems).
5- User Guide
For operate the repeater, please find below details on the functions of all the indication
and control elements of the unit.