Advanced Settings 24
Parameter
Description
Trap Inform Mode
Select
Enabled
or
Disabled
to enable or disable the function. Only
versions of SNMP v2c and SNMP v3 support the function.
Trap Inform Timeout
Input the timeout. Only versions of SNMP v2c and SNMP v3
support the function.
Trap Inform Retry Times
Input the retry times. Only versions of SNMP v2c and SNMP v3
support the function.
Trap Security Engine ID
Set the engine ID. Only version SNMP v3 supports the function.
Trap Security Name
Input the Trap security name. Only version SNMP v3 supports the
function.
Click
Save
.
Step 4
Communities
Add the community, and set the authority for NMS accessing Agent, using the community.
Select
Advanced > Configuration > Security > SNMP > Communities
.
Step 1
Communities interface is displayed. See Figure 4-28.
Communities (1)
Figure 4-28
Click
Add New Entry
.
Step 2
A new record is added. See Figure 4-29.
Communities (2)
Figure 4-29
Set the community name, community secret, source IP, and the source Prefix.
Step 3
Click
Save
.
Step 4
Users
Before configuring the SNMP user, you need to configure the SNMP group the user belongs to.
Select
Advanced > Configuration > Security > SNMP > Users
.
Step 1
The Users interface is displayed. See Figure 4-30.
Users
Figure 4-30
