Dahua PFM906 User Manual Download Page 35

Page: 35 / 136

Page.30.

3.3.7

discovery

Press IP discovery

,tester auto-scan the whole network segment IP, as well as

auto-modify the tester‘s IP to the same network segment with the scanned camera's IP.

Local IP

：

Tester’s IP address, Tester can auto-modify the tester‘s IP to the same network segment with

the scanned camera's IP.

Discovery IP

：

Connected tester equipment’s IP address. If the camera connected to the tester directly,

tester will display the camera’s IP address, if tester connects to Local Area Network, it displays the

current IP address.

Temp IIP

：

after searching IP address, the modified tester’s IP address will not be saved, if you do not

select “Temp IP,” the modified tester’s IP address will auto-save after searching.

Summary of Contents for PFM906









































































































































Search results

Summary of Contents for PFM906

Reviews:

Related manuals for PFM906

Brands by name

Popular brands

Dahua PFM906, User Manual

Search results

Summary of Contents for PFM906

Reviews:

Related manuals for PFM906

Brands by name

Popular brands