Local Basic Operations 77
Figure 4-52
Step 10 Click
Finished
to complete the setup.
4.2.3 Short-Cut Menu to Register Camera
If you have not registered a remote device to a channel, go to the preview interface to add.
Step 1 On the Preview interface, Move your mouse to window.
There is an icon
“+” on the channel window. See Figure 4-53.
Figure 4-53
Step 2 Click
“+”, device pops up interface to add network camera. Refer to
Registration
"
for detailed information.
4.2.4 Image
You can set network camera parameters according to different environments. It is to get the best
video effect.