Local Basic Operations 53
Figure 4-23
2) Tap
on the top right corner.
The interface requiring device initialization is displayed. A pop-up message
reminding you to make sure the Device is initialized is displayed.
3) Tap
OK
.
If the Device has not been initialized, Tap
Device Initialization
to perform
initializing by following the onscreen instructions.
If the Device has been initialized, you can start adding it directly.
4) Tap
Add Device
.
The
Add Device
interface is displayed. See Figure 4-24.
You can add wireless device or wired device. The Manual takes adding wired
device as an example.
Figure 4-24
