Dahua NVR21-4 KS2 Series User Manual Download Page 6

Page: 6 / 361

Features V



Use power supply that meets SELV (safety extra low voltage) requirements, and supply

power with rated voltage that conforms to Limited Power Source in IEC60950-1. For

specific power supply requirements, please refer to device labels.



Products with category I structure shall be connected to grid power output socket, which is

equipped with protective grounding.



Appliance coupler is a disconnecting device. During normal use, please keep an angle that

facilitates operation.

Summary of Contents for NVR21-4 KS2 Series










































































































































































































































































































































































Search results

Summary of Contents for NVR21-4 KS2 Series

Reviews:

Brands by name

Popular brands

Dahua NVR21-4 KS2 Series, User Manual

Search results

Summary of Contents for NVR21-4 KS2 Series

Reviews:

Brands by name

Popular brands