62
Figure 2-69
Note
When this function is on, you can not set window display mode; the window split mode
button at the button of the interface is grey and null.
The window amount and window positions shall be set at the DSS client-end. You need to
refer to the DSS manager user’s manual for detailed information. The keyboard can only
read and can not set.
Note:
On the Apply mode, all DSS setups can be changed automatically once you change
the keyboard setup.
On the output all mode, except window split mode, the rest setup can only be applied
to the DSS once you set on the keyboard and click output video button.
Click save scheme button, you can save current scheme setup. If you have not save, click
reload button, you can go back to previous setup.
Click Close video button, you can close current selected video on the TV wall.
2.5.2 PTZ Control
In the PTZ control mode, you can use the network keyboard to control the PTZ operation.
The interface is the same as when you are controlling via the Web. You can view the video
from the control channel on the left pane and the PTZ control interface on the right pane.
Please refer to chapter 2.3.5.5
for PTZ control, interface introduction and operation
information.
Note
Tour function is null under platform mode and the tour button
is invalid.
Summary of Contents for NKB
Page 1: ...Network Keyboard Quick Start Guide V1 2 0 ...
Page 55: ...54 Figure 2 54 Figure 2 55 ...
Page 64: ...63 ...
