Dahua Network Camera Web 3.0, Operation Manual

Page: 74 / 144

Dahua Network Camera Web 3.0 Operation Manual
66
5.2.11 802.1x
802.1x (port based network access control protocol) supports manual selection of authentication
method to control if device connected to LAN can join the LAN. It well supports authentication, charging,
safety and management requirement of network.
Figure 5-40
Please refer to the following sheet for detailed information.
Parameter Function
Authentication PEAP (protected EAP protocol).
Username
It needs the username to login, which is authenticated by the
server.
Password Please input password here.
5.2.12 QoS
The QoS interface is shown as below. See
Figure 5-41
.
Qos (Quality of Service) is network security mechanism. It is a technology to fix the network delay and
jam problem and etc. For the network service, the quality of service includes the transmission bandwidth,
delay, the packet loss and etc. We can guarantee the transmission bandwidth, lower the delay, and
reduce the loss of the data packet and anti-dither to enhance the quality.
We can set the DSCP (Differentiated Services Code Point) of the IP to distinguish the data packet so
that the router or the hub can provide different services for various data packets. It can select the
different queues according to the priority (64 different priority levels) of the packets and select the
bandwidth of the each queue. Level 0 is the lowest, and level 63 is the highest. It can also discard at the
different ratio when the broad bandwidth is jam.