Dahua N45DB7Z, Quick Start Manual, Page: 12 / 21

Network Configuration 5
All the devices found in the network segment are listed.
Select one or several devices which Status are Uninitialized , and then click Initialize . Step 5
The Device initialization interface is displayed.
Select the devices that need initialization, and then click initialize . Step 6
The password setting interface is displayed. See Figure 2-2.
Password setting interface Figure 2-2
Set and confirm the password of the devices, and then enter a valid email address. Step 7
Click Next .
The final setting interface is displayed.
Password can be modified or reset in System Settings .
Select the options according to your needs and then click OK . Step 8
The Initialization interface is displayed after initializing is completed. Click the success
icon ( ) or the failure icon ( ) for the details.
Click Finish . Step 9
The device status in the Modify IP interface (Figure 2-1) turns to Initialized .
2.2 Modifying Device IP Address
 You can modify IP address of one or multiple devices in one time. This section is based on
modifying IP addresses in batch.

Modifying IP addresses in batch is available only when the corresponding devices have the
same login password.
Double-click "ConfigTool.exe" to open the tool. Step 1
Click . Step 2
The Modify IP interface is displayed. See Figure 2-1.