Dahua N43AM5Z, Quick Start Manual, Page: 11 / 21

Network Configuration 4
2
Network Configuration
Device initialization and IP setting can be finished with the "ConfigTool" or in web interface. For
more information, see the WEB operation manual .
 Device initialization is available on select models, and it is required at first use and after
device is being reset.
 Device initialization is available only when the IP addresses of the device (192.168.1.108
by default) and the PC stays in the same network segment.

Planning useable network segment properly to connect the device to the network.
 The following figures and interfaces are for reference only, and the actual product shall
prevail.
2.1 Initializing Device
Double-click "ConfigTool.exe" to open the tool. Step 1
Click . Step 2
The Modify IP interface is displayed. See Figure 2-1.
Modify IP interface Figure 2-1
Click Search setting . Step 3
The Setting interface is displayed.
Enter the start IP and end IP of the network segment in which you want to search Step 4
devices, and then click OK .