8
4 Device Installation
This section details installing the Multi-Sensor camera to a wall or ceiling. Note that the wall or ceiling
must be capable of supporting a minimum of three times the weight of the camera and a bracket (if
used).
DO NOT connect the camera to the power supply during installation.
4.1 Inserting the Micro SD Card (optional)
Figure 4-1
1.
Remove the two pan head screws and remove the panel from the underside of the
camera.
2.
Insert the Micro SD card (maximum of 128 GB) into the slot shown above.
3.
Replace the lower cover and secure it to the camera with the two (2) pan head screws.