3
2
Installation
2.1
Device Installation
Important
Please make sure the installation surface can min support the 3X weight of the camera
and the bracket.
Figure 2-1
Please refer to Figure 2-1 for more details.
Step 1
Stick installation position map to designated surface where you will install the device (wall or
ceiling).
Step 2
Dig holes according to position marked on installation map.
Step 3
Open accessories bag, take out expansion bolts and insert them into the holes you just dug.
Step 4
Open accessories bag, take out screws. Tighten the 4 screws to fix the device on the installation
surface (wall or ceiling). You can move device sunshade back and forth. When you have fixed
the device, you must tighten screws on sunshade.
Step 5
Plug external wiring of the device properly.
Summary of Contents for N24CB33
Page 2: ...2...
