Dahua MXVR4104 User Manual Download

Page: 178 / 234

Web

Operations

168

5.5.2.2.1 Configuring Wi-Fi Network

You can connect the Device to network through Wi-Fi. Then connect the PC to the same

network. You can login to the web interface using the PC and operate the Device.

NOTE

This function is supported on the Device with the Wi-Fi module only. Follow on-device

information.

Preconditions

Make sure the Device is connected to a Wi-Fi module.

Steps

Select

Setup > Network> WIFI

Step 1

The WIFI interface is displayed.

Select Wifi as the working mode.

Step 2

The WIFI configuration interface is displayed. See Figure 5-51.

Wi-Fi

Figure 5-51

Connect to Wi-Fi.

Step 3



Auto search

1. Click Search SSID.

In the SSID list, all the available Wi-Fi networks are listed, including the

information such as network name, connect mode, authorize mode, and

signal intensity.

2. Double-click the Wi-Fi you want to connect, enter the password, and then

click Save.



Add Wi-Fi manually.

1. Click

Static Setting

The

WIFI

interface is displayed. See Figure 5-52.

Summary of Contents for MXVR4104









































































































































































































































Search results

Summary of Contents for MXVR4104

Reviews:

Related manuals for MXVR4104

Brands by name

Popular brands

Dahua MXVR4104, User Manual

Search results

Summary of Contents for MXVR4104

Reviews:

Related manuals for MXVR4104

Brands by name

Popular brands