Local Configurations
92
1) Click
and then select Device Manager.
The
Device Manager
interface is displayed.
2) Click
, initialize the device as needed and follow on-screen instructions to
connect the device. To do so, you can scan the device label or the serial number
QR code of the device on the device page.
After scanning, the device is added. The serial number of the device is displayed
in
Serial Number
section.
To review the monitoring image of the device, click
Start Preview
.
Step 4
4.6.4 Setting Device Storage
4.6.4.1 Setting basic parameters
In the main menu, select
Storage Management > Basic Configuration
.
Step 1
The
Basic Configuration
interface is displayed. See Figure 4-71.
Basic configuration
Figure 4-71
Configure basic information.
Step 2
Select either to stop recording or overlap earlier recordings when HDD is full.
Set up the length for packaging recordings.
After configuring auto deleting old files, when the Device is working, it deletes
the old files that occurred before the set schedule.
Click
Apply.
Step 3
4.6.4.2 Managing Storage Device
Select
Main Menu > STORAGE > HDD Management
. The
HDD Management
interface is
displayed. See Figure 4-72.
