Dahua MNVR4104-I Series User Manual Download

Page: 98 / 145

See Table 5-12.

Table 5-12

Overlay parameters

Parameter Description

Channel
title

Select

Channel Title

, and the

Setting

button is displayed. Then click

Setting

on the

right of the

Channel Title

, enter the channel title, and drag it to a proper location.

Time title

Select the

Time Title

check box, the

Setting

button is displayed. Then click

Setting

on the right of the

Time Title

, and then drag it to a proper location.

Plate No.

Tick

Plate No.

Setting

button shows up at the right side of

Plate No.

, click that and

drag plate title to proper position.

GPS
display

Select the

GPS Display

check box, the

Setting

button is displayed. Then click

Setting

on the right of the

GPS Display

, and then drag it to a proper location.

Click

5.5.2.4

Storage Path

You can configure the storage path of captured snapshots and video recordings.

Select SETTING > CAMERA > ENCODE > Storage Path.

The

Storage Path

interface is displayed.

Storage Path

Click

Browse

to select the save path for snapshots and recordings.

Images and recordings by using functions of snapshots

and recordings

on the

Live

interface are saved in these two paths by default: C:\PictureDownload and
C:\RecordDownload.

Click

5.5.3

Configuring PTZ Settings

You can configure the corresponding PTZ of the device channel.

Select SETTING > CAMERA > PTZ.

The

PTZ

interface is displayed. See Figure 5-42.

Summary of Contents for MNVR4104-I Series


















































































































































Search results

Summary of Contents for MNVR4104-I Series

Reviews:

Related manuals for MNVR4104-I Series

Brands by name

Popular brands

Dahua MNVR4104-I Series, User Manual

Search results

Summary of Contents for MNVR4104-I Series

Reviews:

Related manuals for MNVR4104-I Series

Brands by name

Popular brands