Dahua MNVR4104-I Series User Manual Download

Page: 118 / 145

110

Position report (platform schedule)

Click

5.8.3

Configuring Serial Port Parameters

You can configure the serial port parameters such as baud rate, date bits, stop bits, and parity.

Select

Setting > System > Serial port

The

Serial Port

interface is displayed. See Figure 5-61.

Serial Port

Configure parameters. For details, see

Table 5-22

Serial port setting parameters description

Parameters Description

Serial Port
Function

Select the corresponding protocol.

Console: Upgrades programs and debug by suing the serial interface and mini
terminal software.

GPS: Used for data communication with GPS module and firmware update, etc.

Light Box: External vehicle light box, used to judge the device status (such as
recording status) by the status of the light in the light box.

MD02: Used to connect to MD02 broadcast screen, and display alarm sounds
and icons.

Summary of Contents for MNVR4104-I Series


















































































































































Search results

Summary of Contents for MNVR4104-I Series

Reviews:

Related manuals for MNVR4104-I Series

Brands by name

Popular brands

Dahua MNVR4104-I Series, User Manual

Search results

Summary of Contents for MNVR4104-I Series

Reviews:

Related manuals for MNVR4104-I Series

Brands by name

Popular brands