Dahua MCVR6204 User Manual Download Page 55

Page: 55 / 239

Local Configurations

2) Select the

Monitor

check box for

Time Display

License No.

, and

Speed

3) Click

Setup

4) Drag the title to a proper position, and then right-click on the screen to return to

Overlay

interface.

5) Click

Save

The configured titles are displayed in the windows of live view screen.

Click

Save

Step 6

The

DISPLAY

interface is displayed.

Click

Save

Step 7

4.2.2 PTZ control panel

You can perform overall remote control to the cameras through PTZ control, configure and call

PTZ functions. This function is supported only on the camera with PTZ function.

Before operating PTZ, please make sure the Device is connected to PTZ.

4.2.2.1 Configuring PTZ Connection Settings

You need to configure the PTZ connection settings before use.

Select

Main Menu > SETTING > PTZ

Step 1

The

PTZ

interface is displayed.

In the

Channel

list, select a channel.

Step 2

In the

PTZ Type

list, select PTZ type, and then configure other parameters.

Step 3



If Channel 1 to Channel 8 is selected, the PTZ type is

Local

by default which

cannot be modified. See Figure 4-26. Configure the parameters. For details, see

Table 4-11.

PTZ settings (Local)

Figure 4-26

Table 4-11 PTZ setting parameters description

Summary of Contents for MCVR6204
















































































































































































































































Search results

Summary of Contents for MCVR6204

Reviews:

Dahua MCVR6204, User Manual, Page: 55 / 239

Search results

Summary of Contents for MCVR6204

Reviews: