Web Operations
178
Parameter
Description
Port
Enter the port value of SMTP server. For details, see Table 5-25.
Username
Enter the user name and password of SMTP server. For details, see Table
Password
Sender
Enter the sender’s email address.
Encrypt type
In the Encrypt list, select an encryption type from NONE, SSL, and TLS.
For details, see Table 5-25.
Subject
Supports Chinese, English, and Arabic numerals. You can enter maximum
63 characters.
Receiver
Enter the email address of mail receiver. You can enter maximum three
email addresses separated by colon.
Interval
This is the interval that the system sends an email for the same type of
alarm event, which means, the system does not send an email upon any
alarm event.
The interval ranges from 0 seconds to 3600 seconds. 0 means that there
is no interval.
This setting helps to avoid the large amount of emails caused by frequent
alarm events.
Health Enable
The system can send a test email to check the connection.
Select the Health Enable check box, and then enter the interval. The
system can send a test email to check the connection according to the
interval.
The value ranges from 30 minutes to 1440 minutes.
Email Test
Click
Test
to test the email sending and receiving function. If the
configuration is correct, the receiver’s email account will receive the test
email. Before testing, click
Save
to save the settings.
Table 5-25 Provides configuration instructions of common email boxes for your
reference.
Table 5-25 Common mailbox configuration parameters
Mailbox
type
SMTP server
Encrypt
type
Port
Description
smtp.qq.com
SSL
465
Do not select
NONE
for encrypt
type.
The mailbox must have applied
SMTP service.
The password must be an
"authorized password". Both the QQ
login password and email login
password are invalid.
Obtain the authorized password when
your mailbox is applying for SMTP
service.
TLS
587