Dahua MCVR5104GCW User Manual Download Page 98

Page: 98 / 142

Channel Title

You can enable this function so that system overlays channel
information in video window.

You can use the mouse to drag the channel title position.

You can view channel title on the live video of the WEB or the
playback video.

GPS Overlay

Overlay GPS information such as (speed, longitude, latitude) on
the video.

Plate Overlay

Overlay some plate information on the video.

5.9.1.2.4 Zero-Ch Encoding

The zero-channel encoding interface is shown as in Figure 5-21.

Figure 5-21

Please refer to the following sheet for detailed information.

Parameter

Function

Compression

H.264

Resolution

D1/HD1/CIF/2CIF/QCIF.

Frame Rate

～

25(30).

Bit Rate(kb/s)

640/768/896/1024.

5.9.1.2.5 Preview Overlay

The preview overlay interface is shown as in Figure 5-22. You can overlay time, speed, plate

information and etc on the device preview interface and Web monitor video.

The preview overlay is to overlay information on the preview interface or WEB monitor

video, the information is not included in record file.

Summary of Contents for MCVR5104GCW















































































































































Search results

Summary of Contents for MCVR5104GCW

Reviews:

Related manuals for MCVR5104GCW

Brands by name

Popular brands

Dahua MCVR5104GCW, User Manual

Search results

Summary of Contents for MCVR5104GCW

Reviews:

Related manuals for MCVR5104GCW

Brands by name

Popular brands