Dahua MCVR5104GCW User Manual Download Page 71

Page: 71 / 142

Figure 4-63

4.9.7.2 Tampering

When someone viciously masks the lens, or the output video is in one-color due to the

environments light change, the system can alert you to guarantee video continuity. Tampering

interface is shown as in Figure 4-64. You can enable alarm output channel and then enable

show message function. You can refer to chapter4.9.7.1Video Loss for detailed information.

Note:

In Detect interface, copy/paste function is only valid for the same type, which means you can

not copy a channel setup in video loss mode to tampering mode.

Figure 4-64

4.9.8

PTZ

Note:

All the operations here are based on PELCOD protocol. For other protocols, there might

be a little difference.

Cable Connection

Please follow the procedures below to go on cable connection



Connect the dome RS485 port to DVR 485 port.



Connect dome video output cable to DVR video input port.



Connect power adapter to the dome.

PTZ Setup

Note:

The camera video should be in the current screen. Before setup, please check the

following connections are right:



PTZ and decoder connection is right. Decoder address setup is right.

Summary of Contents for MCVR5104GCW















































































































































Search results

Summary of Contents for MCVR5104GCW

Reviews:

Related manuals for MCVR5104GCW

Brands by name

Popular brands

Dahua MCVR5104GCW, User Manual

Search results

Summary of Contents for MCVR5104GCW

Reviews:

Related manuals for MCVR5104GCW

Brands by name

Popular brands