Dahua MCVR5104GCW User Manual Download Page 38

Page: 38 / 142

Figure 4-11

4.7.1

HDD Information

Here is to list hard disk type, total space, free space, and status. See Figure 4-12.
○ means current HDD/SD card is normal.. - means there is no HDD.

If disk is damaged, system shows as “?”. Please remove the broken hard disk before you add a

new one.

Once there is a hard disk confliction, please check hard disk time and system time is the same or

not. Please go to setting then general to modify system time. At last, reboot the system to solve

this problem.

After system booted up, if there is any confliction, system goes to HDD information interface

directly. Please note, system does not ask you to deal with it forcedly.

Summary of Contents for MCVR5104GCW















































































































































Search results

Summary of Contents for MCVR5104GCW

Reviews:

Related manuals for MCVR5104GCW

Brands by name

Popular brands

Dahua MCVR5104GCW, User Manual

Search results

Summary of Contents for MCVR5104GCW

Reviews:

Related manuals for MCVR5104GCW

Brands by name

Popular brands