106
The date and time interface is shown as in Figure 5-44
Figure 5-44
Please refer to the following sheet for detailed information.
Parameter Function
Date format Here you can select date format from the dropdown list.
Time
Format
There are two options: 24-H and 12-H.
Time zone
The time zone of the device.
System
time
It is to set system time. It becomes valid after you set.
Sync PC
You can click this button to save the system time as your PC current
time.
DST
Here you can set day night save time begin time and end time. You
can set according to the date format or according to the week format.
NTP
You can check the box to enable NTP function.
NTP server You can set the time server address.
Port
It is to set the time server port.
Interval
It is to set the sync periods between the device and the time server.
5.9.5.2 Account
Note:
For the character in the following user name or the user group name, system max supports
6-digits. The space in the front or at the end of the string is null. The valid string includes:
character, number, and underline.
The user amount is 20 and the group amount is 8 when the device is shipped out of the
factory. The factory default setup includes two levels: user and admin. You can set the
corresponding group and then set the rights for the respective user in the specified groups.
